The Warmup Floor Probe Conduit and Brass Cap is an underfloor heating installation accessory designed to provide a suitable conduit arrangement for installing a Warmup floor temperature probe. Used with compatible Warmup thermostats and floor probes, it helps provide a practical route for the probe within the floor construction while allowing the probe to be accessed or replaced if required.
Key Features
Designed for Warmup floor temperature probes
Includes floor probe conduit and brass cap
Suitable for Warmup underfloor heating installations
Provides a protected route for the floor probe
Allows the floor probe to be installed within the floor construction
Supports future access to the probe
Designed for use with compatible Warmup thermostats
Listed by Warmup as a thermostat ancillary
Floor Probe Installation
A floor probe allows a compatible Warmup thermostat to monitor the temperature of the floor. The probe is positioned within the floor construction so that the thermostat can use the measured floor temperature for control and temperature limitation where supported.
The conduit provides a dedicated route for the probe, helping to protect the sensor cable within the floor construction. The brass cap is used at the end of the conduit to provide a finished end for the probe installation.
The conduit should be installed in accordance with the relevant Warmup underfloor heating and thermostat installation instructions, with the probe positioned correctly within the heated area.
Compatible Warmup Floor Probe
Warmup lists the NTC10K Floor Probe as a thermostat ancillary alongside the Floor Probe Conduit and Brass Cap. The NTC10K probe has a 4.5mm tip diameter and is used for floor temperature sensing with compatible Warmup thermostats.
Using a dedicated conduit helps make the floor probe installation more practical, particularly where future replacement or servicing of the sensor may be required.
Warmup's current product documentation lists the Floor Probe Conduit and Brass Cap within its Thermostat Ancillaries range.
Installation
The conduit should be positioned during the underfloor heating installation so that the floor probe can be located correctly within the heated floor area. The installation should provide an appropriate route for the probe cable back to the thermostat.
Follow the installation instructions supplied with the relevant Warmup heating system, thermostat and floor probe. Care should be taken to avoid damaging the probe or its cable during installation.
Ideal Applications
The Warmup Floor Probe Conduit and Brass Cap is suitable for:
Electric underfloor heating installations
Warmup thermostat installations
Floor temperature sensing applications
New underfloor heating installations
Floor probe replacement installations
Domestic and commercial underfloor heating projects
Tile, stone and other compatible floor constructions
Important Information
This product is an installation accessory and does not contain a heating element or temperature sensor. A compatible Warmup floor probe is required separately.
The Warmup NTC10K Floor Probe is listed separately and has a 4.5mm tip diameter. Always check compatibility with the chosen Warmup thermostat and follow the manufacturer's installation instructions.
What's Included
Warmup Floor Probe Conduit
Brass Cap
Why Choose the Warmup Floor Probe Conduit and Brass Cap?
The Warmup Floor Probe Conduit and Brass Cap provides a dedicated installation solution for positioning a compatible floor temperature probe within an underfloor heating system. Used alongside the Warmup NTC10K Floor Probe and compatible thermostat, it helps create a practical and serviceable floor temperature sensing installation.
